Champions by Design
Team Associated has been at the leading edge of 1:10 scale 2WD off road for the last 40 years starting with the original RC10 and are proud to introduce this next generation to the world--the RC10B7. 40 years has seen a lot of development and changes, with each generation being a step forward from the last. The RC10B7 is no exception, boasting new long-arm suspension geometry, weight-centralized electronics layout, KPI adjustable steering blocks, and increased tunability throughout the whole chassis. These innovations have increased the potential for grip and corner speed, which leads to faster lap times and an overall easier-to-drive feel than the previous generation.
The RC10B7D is the recommended starting kit for those who plan to race on dirt, clay, and some low-grip AstroTurfR tracks. This kit comes equipped with a ball differential and an optimized setup which includes softer springs and lower pack pistons. As with previous generations, the RC10B7D and RC10B7 feature fully interchangeable parts between the two kits, which allows the user to pick and choose what configuration they want to use depending on track conditions. Both versions come with the same durability, speed, and lineage of a champion that is found in any Team Associated race platform.
768x1024 1280x960 1440x900 1920x1200
This vehicle needs extra parts to make it operational. Click on the Specifications link to see what extra equipment you'll need to make the vehicle operational, such as batteries and charger.
Due to ongoing R&D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, and pinion gear. Assembly and painting required.
New to RC? Check out our Newcomer's Guide to Radio-Controlled Cars and Trucks
Team Associated has been at the leading edge of 1:10 scale 2WD off road for the last 40 years starting with the original RC10 and are proud to introduce this next generation to the world--the RC10B7. 40 years has seen a lot of development and changes, with each generation being a step forward from the last. The RC10B7 is no exception, boasting new long-arm suspension geometry, weight-centralized electronics layout, KPI adjustable steering blocks, and increased tunability throughout the whole chassis. These innovations have increased the potential for grip and corner speed, which leads to faster lap times and an overall easier-to-drive feel than the previous generation.
The RC10B7D is the recommended starting kit for those who plan to race on dirt, clay, and some low-grip AstroTurfR tracks. This kit comes equipped with a ball differential and an optimized setup which includes softer springs and lower pack pistons. As with previous generations, the RC10B7D and RC10B7 feature fully interchangeable parts between the two kits, which allows the user to pick and choose what configuration they want to use depending on track conditions. Both versions come with the same durability, speed, and lineage of a champion that is found in any Team Associated race platform.
Wallpaper
#90042 RC10B7D Team Kit768x1024 1280x960 1440x900 1920x1200
This vehicle needs extra parts to make it operational. Click on the Specifications link to see what extra equipment you'll need to make the vehicle operational, such as batteries and charger.
Due to ongoing R&D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, and pinion gear. Assembly and painting required.
New to RC? Check out our Newcomer's Guide to Radio-Controlled Cars and Trucks
Features
- 5-gear laydown transmission with low profile motor mount moves weight of motor closer to the center of the car
- Long-arm suspension geometry improves grip and predictability in all conditions
- KPI adjustable steering and caster blocks allows for fine tuning steering feel. Three options are included in the kit.
- Vertical front outer ballstud allows fine tuning of roll center, camber gain, and link length
- Height adjustable aluminum front bulkhead allows for further tuning of front roll center
- Standard and HRC (High Roll Center) rear hubs included
- Highly adjustable battery holder with thumb tabs allows for easy battery removal and fine tuning of weight bias
- 7075-T6 aluminum chassis with increased departure angle and optional weight plate pockets
- HD 69mm CVA bones and differential outdrives for improved durability
- Lightweight molded servo mount
- One-piece rear wing mount improves durability
- New 7-inch rear wing and 2.5-inch front wing
- Low-profile body included
- Shock tower covers front and rear
- 3.5mm turnbuckles and ballcups
Required to Complete
- 1:10 scale 540-size electric RC car motor
- 1:10 scale radio control electronic speed control
- 7.4V-7.6V 2S LiPo with "shorty" battery dimensions (standard or low-profile height)
- Battery charger (for chosen battery mentioned above)
- Lexan specific spray paint for body
- 1:10 scale off-road wheels and tires
- 4 AA batteries for radio-controlled car radio
- Other helpful items: Silicone Shock Fluid, Silicone Diff Fluid, Body Scissors (#1737), Reamer (#1499) or Hole Punch, FT Wrench Set (#1519), Hobby Knife, Needle Nose Pliers, Wire Cutters, Soldering Iron, Calipers or a Precision Ruler.
- 2-channel surface transmitter, 2-channel receiver, and steering servo
Manuals/Documents
- Blank Setup Sheet (editable) (1.08 Mb)
- #90042 RC10B7D Team Kit -- press release (745.82 Kb)
- Instruction Manual (14.18 Mb)
- #90041 & 90042 RC10B7 and RC10B7D Parts List -- press release (322.33 Kb)
- #92422, 92423 Clear Bodies for the RC10B7 and B7D -- press release (259.45 Kb)
- #92490 RC10B7 Chassis, -4mm -- press release (231.63 Kb)
- FT Aluminum Hubs for the RC10B7 and B7D -- press release (316.14 Kb)
- RC10B7 and B7D FT Weight Options -- press release (257.85 Kb)
- RC10B7 FT Option Parts -- press release (247.57 Kb)
- Spring Color Codes (128.05 Kb)
- #92482 RC10B7 Factory Team Battery Mount Set -- press release (288.89 Kb)
- RC10B7 Factory Team Mounts -- press release (261.04 Kb)
Setup Sheets
Download | Driver | Event | Date |
---|---|---|---|
Download | Brent Thielke | ROAR 1:10 Carpet Off-Road Nationals | 08/18/2024 |
Indoors, black crc carpet, medium size, medium-high grip | |||
Download | Jovy Levin | JConcepts Summer Carpet Indoor Nationals | 06/09/2024 |
Indoors, carpet, high grip, tight | |||
Download | Brent Thielke | ROAR 1:10 Dirt Off-Road Nationals | 04/21/2024 |
Indoors, natural dirt, high grip, low moisture, grooved | |||
Download | Spencer Rivkin | ROAR 1:10 Dirt Off-Road Nationals | 04/21/2024 |
Indoors, natural dirt, high grip, low moisture, grooved | |||
Download | Mason Templeman | ROAR 1:10 Dirt Off-Road Nationals | 04/21/2024 |
Indoors, natural dirt, high grip, low moisture, grooved | |||
Download | Jermaine Robinson | JBRL Round #1 | 03/31/2024 |
Indoors, dirt, medium-high grip, dry, grooved | |||
Download | Matthew Gonzales | JBRL Round #1 | 03/31/2024 |
Indoors, dirt, medium-high grip, dry, grooved | |||
Download | Brent Thielke | JConcepts Spring Indoor Nationals | 03/24/2024 |
Indoors, Black CRC Carpet, Medium-High Grip | |||
Download | Marcus Kaerup | British Off-Road Grand Prix | 03/09/2024 |
Indoor, carpet, large, very high grip | |||
Download | Davey Batta | Desert Classic | 03/03/2024 |
Indoors, dirt, medium-high grip, dusty, grooved | |||
Download | Aydin Horne | New York State Off-Road Championship | 02/18/2024 |
Indoors, Carpet, Very High Grip, Fuzzy | |||
Download | Spencer Rivkin | JConcepts Winter Indoor Nationals | 02/11/2024 |
Indoors, Dirt, Medium-High Grip, Dusty, Hard Packed | |||
Download | Brent Thielke | California State Championships | 02/04/2024 |
Indoors, Glued Dirt, Hight Grip, Smooth, High Speed | |||
Download | Davey Batta | California State Championships | 02/04/2024 |
Indoors, Glued Dirt, Hight Grip, Smooth, High Speed | |||
Download | Spencer Rivkin | Club Racing | 01/24/2024 |
Indoors, Dirt, Hard Packed, Dusty, Misted, Grooved | |||
Download | Aydin Horne | Carpet Testing | 01/21/2024 |
Indoors, CRC Fastrak Carpet, Medium-High Grip, Fuzzy | |||
Download | Brandon Foote | Carpet Testing | 01/21/2024 |
Indoors, Carpet, CRC Black, Very High Grip, Medium Size | |||
Download | Dustin Evans | Club Racing | 01/21/2024 |
Indoors, Dirt, High Grip, Small, Tight | |||
Download | Alexander Landen | Carpet Testing | 01/14/2024 |
Indoors, EOS Carpet, Large, High Grip | |||
Download | Marcus Kaerup | Carpet Testing | 01/14/2024 |
Indoors, EOS Carpet, Large, High Grip | |||
Download | Billy Hayden | Club Racing | 01/14/2024 |
Indoors, Dirt, Medium-High Grip, Blown Off, Misted | |||
Download | Tommy/Jamie Hall | BRCA Masters | 01/13/2024 |
Indoors, Cork, Medium-Low Grip, Smooth | |||
Download | Andrew Selvaggi | Outdoor Testing | 01/10/2024 |
Outdoors, Dirt, Oiled, High Grip, Medium-High Grip, Dry | |||
Download | Brent Thielke | Clash of Champions | 01/07/2024 |
Indoors, dirt, very high grip, sealed surface | |||
Download | Davey Batta | Clash of Champions | 01/07/2024 |
Indoors, dirt, very high grip, sealed surface | |||
Download | Neil Cragg | Winter Series | 01/04/2024 |
Indoors, EOS Carpet, High Grip, Medium Size | |||
Download | Team Carpet | Carpet Testing | 01/01/2024 |
Indoors, CRC Black Carpet, High Grip |
- Power Source:
- Electric
- Terrain:
- Off-Road
- Body Style:
- Buggy
- Scale Size:
- 1:10 Scale
- Assembly Level:
- Kit (This vehicle comes as a kit and must be fully assembled by the user. See "Required to Complete" for extra items needed.)
- Length:
- 390mm (15.35in)
- Width:
- varies
- Wheelbase:
- varies
- Weight:
- varies
- Internal Gear Ratio:
- 2.60:1
- Drive:
- 2WD