Reedy SC480X Program Card
The pre-programmed default ESC settings work very well in most situations, but if you want access to additional settings for fine-tuning, you can do so using optional Program Card (#27034). The following settings can be changed using the Program Card:
Initial Drive: Throttle applied the moment the trigger is moved from the neutral position to the throttle range.
Low-Voltage Cutoff: The cell voltage at which the ESC will shut off to protect the battery.
Drag Brake: The brake force applied when the throttle trigger is returned to the neutral position.
Max Reverse Power: The maximum reverse speed allowed relative to the forward speed.
Punch Control: The aggressiveness of the application of throttle.
Initial Drive: Throttle applied the moment the trigger is moved from the neutral position to the throttle range.
Low-Voltage Cutoff: The cell voltage at which the ESC will shut off to protect the battery.
Drag Brake: The brake force applied when the throttle trigger is returned to the neutral position.
Max Reverse Power: The maximum reverse speed allowed relative to the forward speed.
Punch Control: The aggressiveness of the application of throttle.
This part fits the following other parts
- #27011 - Reedy SC480X Brushed Crawler ESC
- #27013 - Reedy SC500X Brushed ESC
Manuals/Documents
- Reedy SC480X ESC and Program Card -- press release (359.92 Kb)
- Reedy SC480X ESC manual (655.26 Kb)
- HEADER:
- Setting / Value
- Initial Drive:
- 2%, 5%*, 10%, 15%
- Low Voltage Cutoff (V/cell):
- 3.2, 3.3, 3.4*
- Drag Brake:
- 0%, 50%, 75%, 100%*
- Max Reverse Power:
- 50%, 75%*, 100%
- Punch Control:
- Soft*, Medium, Strong
- HEADER:
- *Default setting