RC10T4 Factory Team

RC10T4 Factory Team

$234.99
You save $155.00
MSRP: $389.99
SKU:
7022
UPC:
784695070226
Out of stock
This vehicle has been discontinued.

RC10T4 Factory Team
Hot on the heels of the acclaimed RC10B4 buggy comes the RC10T4, Team Associated's state-of-the-art electric racing truck.

The T4 features a longer wheelbase, a full 1/2 inch wider than the previous generation T3 truck, putting the T4 at the maximum ROAR legal dimensions for higher cornering speeds and stability during jumping and through bumpy sections of the track.

The result is a truck with a tremendous range of tunability for everything from loose, dusty tracks to high-bite, blue-groove conditions. The T4 provides the more stable, predictable driving feel that serious racers expect.

Team Associated announces the new Factory Team RC10T4 Truck kit ... the truck won the ROAR Off Road National Championship! Now you can get your own, full-option "Factory" ride truck complete with over $190 worth of Factory Team upgrades!

"What stands out in my mind about the T4FT is how easily it drove, and how it made me feel like a driver who could feel the difference in the graphite. ... In the ongoing truck wars, the T4 Factory Team is a lethal weapon indeed." -- Mike Velez, Xtreme RC, October 2004

The Team's standard threaded, hard-anodized PTFE-coated shocks with Gold shafts handle the damping on all four corners. A complete set of 14 PTFE-sealed bearings are included to ensure smooth, efficient operation. Lightweight outdrives are included, as well as a new clear injection-molded gear cover. To get the power to the ground, the T4 Factory Team comes with Pro-Line M3 "Holeshot" rear tires and M3 compound "Edge" front tires on white Pro-Line dish wheels.

The T4 Factory Team features all molded carbon components including the chassis, front and rear shock towers, front and rear A-Arms, chassis brace, and top plate. The battery strap is made of woven carbon fiber, and comes with a chrome/black "AE Factory Team" sticker.

No Factory Team kit would be complete without a full array of "Factory Blue" components, so the T4 includes blue titanium turnbuckles, aluminum servo mounts, wheel spacers, front hinge pin brace, body clips, and a lightweight milled blue aluminum motor mounting plate.

If you're serious about racing, get the same truck used to win the ROAR Off Road National Championship .. Team Associated's Factory Team T4.

Features

  • Angled bellcrank steering minimizes bump steer to maintain constant steering angles throughout the full range of suspension travel
  • Trailing front axle or optional inline steering blocks can be used to tune steering response
  • Front shocks are mounted behind the shock towers. All four suspension arms utilize a captured hinge pin design that uses no E-clips.
  • The forward-swept front end design provides maximum front end ground clearance. Chassis underside is contoured for maximum clearance when cornering, and minimal ground contact area on hard landings.
  • 2.6:1 laydown transmission now uses the higher torque capacity differential from the RC10GT. Ultra-compact, efficient, low-CG design.
  • Long CVDs dogbones and axles have been designed into the rear suspension to push the T4 out to maximum legal width for more traction.
  • High torque capacity, double-sided slipper provides finer adjustment, easier assembly, and lower rotating mass than comparable double-sided slippers.
  • Impact-resistant rear motor guard and body mounts. Lower motor, battery, shock and body mounting positions give the T4 a lower CG for higher cornering speeds and greater stability.

Required to Complete

  • R/C 2-channel surface frequency radio system
  • Battery pack (6 cell)
  • Battery charger (peak detection charger recommended)
  • Electronic speed control
  • R/C electric motor
  • Pinion gear
  • Tools

Manuals/Documents

Setup Sheets

DownloadDriverEventDate
DownloadRyan MaifieldCactus Classic03/13/2009
Blue groove, bumpy
DownloadRyan CavalieriMidwest Offroad Championships12/09/2007
High traction clay
DownloadJR MitchJConcepts Clash12/09/2007
High traction blue groove
DownloadRyan CavalieriOffroad Shootout07/08/2007
High traction blue groove
DownloadJared TeboReedy Truck Race of Champions10/29/2006
High traction smooth blue groove
DownloadBrent ThielkeROAR Modified Nationals08/13/2006
Low/med. traction bumpy clay
DownloadRyan CavalieriCactus Classic03/19/2006
High traction smooth blue groove
DownloadRyan CavalieriReedy Truck Race10/30/2005
High traction bumpy blue groove
DownloadRyan MaifieldReedy Truck Race10/30/2005
High traction blue groove
DownloadJared TeboReedy Truck Race10/30/2005
High traction blue groove
DownloadBrent ThielkeReedy Truck Race10/30/2005
High traction blue groove
DownloadJared TeboROAR Modified Nationals07/24/2005
Med. traction bumpy clay
DownloadMark PavidisROAR Offroad Modified Nats06/13/2004
High traction blue groove
Power Source:
Electric
Terrain:
Off-Road
Body Style:
Truck
Scale Size:
1:10 Scale
Assembly Level:
Kit (This vehicle comes as a kit and must be fully assembled by the user. See "Required to Complete" for extra items needed.)
Length:
390mm (15.35in)
Width:
316mm (12.44in)
Wheelbase:
288mm (11.34in)
Weight:
1441g (3.18lbs)
Internal Gear Ratio:
2.6:1
Drive:
2WD